| Blow Molding Type | Extrusion Blow Molding Machine |
|---|---|
| Maximum Application Size | 20L |
| Cooling Water Pressure | 0.6 MPA |
| Water Consumption | 100 L/Min |
| Mould Lifespan | > 1,000,000 Cycles |
| Blow Molding Type | Extrusion Blow Molding Machine |
|---|---|
| Maximum Application Size | 20L |
| Cooling Water Pressure | 0.6 MPA |
| Water Consumption | 100 L/Min |
| Mould Lifespan | > 1,000,000 Cycles |
| Max.Product Volume | 5L |
|---|---|
| Power Supply | 220V/380V/400V/415V/440V 50/60HZ |
| Clamping Force | 110KN |
| Heating Zone | 3 |
| Heating Power | 13.8KW |
| Clamping Force | 250KN |
|---|---|
| Control System | PLC |
| Heating Power | 22KW |
| Max.Extrusion Capacity | 120KG/H |
| Screw Diameter | 80mm |
| Model NO. | BSM65 |
|---|---|
| Station | Single Station Or Double Station |
| Oil Pump Motor Power | 5.5kw |
| Head Heating Power | 5.7kw |
| Trademark | DAWSON |
| Product Range | 10~30L |
|---|---|
| Productivity | 45~60BPH |
| Screw Diameter | 80 Mm |
| Screw L/D Ratio | 24 |
| Screw Drive Power | 37 KW |
| Model NO. | ABLB90 |
|---|---|
| Station | Single Station Or Double Station |
| Oil Pump Motor Power | 5.5kw |
| Head Heating Power | 5.7kw |
| Trademark | DAWSON |
| Model NO. | ABLB90 |
|---|---|
| Station | Single Station Or Double Station |
| Oil Pump Motor Power | 5.5kw |
| Head Heating Power | 5.7kw |
| Trademark | DAWSON |
| Max. Product Volume | 30L |
|---|---|
| Dry Cycle | 300 Pc/h |
| Screw Diameter | 80 Mm |
| Screw L/D Ratio | 24 |
| Screw Drive Power | 37 KW |
| Model NO. | DSB80-30L |
|---|---|
| Station | Single Station Or Double Station |
| Oil Pump Motor Power | 5.5kw |
| Head Heating Power | 5.7kw |
| Trademark | DAWSON |
