| Max Product Volume | 8 Liters |
|---|---|
| Output Capacity | 200PCS/H |
| Condition | New |
| Screw Diameter | 75mm |
| Export Port | Shanghai |
| Blow Molding Type | Extrusion Blow Molding Machine |
|---|---|
| Maximum Application Size | 300L |
| Cooling Water Pressure | 0.3 MPA |
| Water Consumption | 180 L/Min |
| Mould Lifespan | > 1,000,000 Cycles |
| Blow Moulding Type | Stretch Blow Moulding |
|---|---|
| Core Components | Bearing, Motor, Pump, Gear, PLC, Pressure Vessel, Engine, Gearbox |
| Application | Plastic Models, Water Drums, Cooling Box |
| Heating Method | Electric Cycle Heating |
| PLC Control | Japanese Mitsubishi |
| Max Product Volume | 20L |
|---|---|
| Auto-Deflashing | With Auto-Deflashing |
| Screw Diameter | 100mm |
| Screw L/D Ratio | 25L/D |
| Max Mold Size | 800X1000mm |
| Control System | PLC |
|---|---|
| Cooling System | Air Cooling |
| Driving System | Servo Motor |
| Heating System | Electric Heating |
| Material | Plastic |
| Screw Diameter | 70mm |
|---|---|
| Product Range | 0~5L |
| Material | HDPE, LDPE, PP |
| Clamping Force | 68KN |
| Template Size | 380*450mm |
| Key Words | Blow Molding Machine |
|---|---|
| Screw Diameter | 100mm |
| Air Pressure(MPa) | 0.8 MPa |
| Plastic Processed | PE, PVC, PP, HDPE, PC, PE/PP, HDPE/PP |
| Screw Drive Power | 55 Kw |
| Blow Moulding Type | Extrusion Blow Moulding |
|---|---|
| Screw Heating Power | 17.5-21KW |
| Application | Plastic Models, Water Drums, Cooling Box |
| Motor | Servo Motor |
| PLC Control | Japanese Mitsubishi |
| Max. Product Volume | 5 L |
|---|---|
| Dry Cycle | 1000 PC/H |
| Screw Diameter | 65 Mm |
| Screw L/D Ratio | 24 L/D |
| Screw Drive Power | 18.5 KW |
| Max. Product Volume | 120L |
|---|---|
| Dry Cycle | 360 PC/H |
| Screw Diameter | 100 MM |
| Screw L/D Ratio | 28 L/D |
| Screw Drive Power | 55 KW |
