| Screw Diameter | 85 Mm |
|---|---|
| Shot Volume(theoretical) | 2418 Cm³ |
| Shot Weight | 2200 G |
| Injection Pressure | 167 MPa |
| Injection Rate | 482 G/s |
| Instructions Provided | Instructions In Chinese And English |
|---|---|
| Samples Provided | If Required |
| Blow Molding Type | Extrusion Blow Molding Machine |
| Showroom Location | None |
| Water Flow | 100L/Min |
| Blow Molding Type | Extrusion Blow Molding Machine |
|---|---|
| Maximum Application Size | 5L |
| Cooling Water Pressure | 0.6 MPA |
| Water Consumption | 100 L/Min |
| Mould Lifespan | > 1,000,000 Cycles |
| Condition | New |
|---|---|
| Automatic | Yes |
| Warranty | 1 Year,One Year |
| Blow Moulding Type | Extrusion Blow Moulding,Stretch Blow Moulding, Stretch Blow Molding Machine |
| Application | Bottle,water Tank,jerrycan,Jerry Can, Toy |
| Blow Molding Type | Extrusion Blow Molding Machine |
|---|---|
| Maximum Application Size | 5L |
| Cooling Water Pressure | 0.6 MPA |
| Water Consumption | 100 L/Min |
| Mould Lifespan | > 1,000,000 Cycles |
| Application | Beverage Bottle, Oil Bottle |
|---|---|
| Automatic | Fully Automatic |
| Technical Service | 24 Hours/365 Days Online |
| Controlled By | PLC |
| Moulding Closing And Opening Cylinder | Festo |
| Plastic Processed | PET |
|---|---|
| Blow Moulding Type | Stretch Blow Moulding |
| Application | Plastic Models, Water Drums, Cooling Box |
| Motor | Servo Motor |
| PLC Control | Japanese Mitsubishi |
| Model NO. | ABLB75I-1 |
|---|---|
| Screw Heating Capacity | 6 Kw |
| HDPE Output | 100kg/H |
| Clamping Force | 80kn |
| Max Mould Size | 400X450mm |
| Model NO. | ABLB75I-1 |
|---|---|
| Screw Heating Capacity | 6 Kw |
| HDPE Output | 100kg/H |
| Clamping Force | 80kn |
| Max Mould Size | 400X450mm |
| Model NO. | ABLB75I-1 |
|---|---|
| Screw Heating Capacity | 6 Kw |
| HDPE Output | 100kg/H |
| Clamping Force | 80kn |
| Max Mould Size | 400X450mm |
