| LDistance Between Tie Bars | 510*510 Mm |
|---|---|
| Used For | Tube Connector, Preform, Caps, Crates, Toys... |
| After-sales Service Provided | Video Technical Support, Free Spare Parts, Field Installatio |
| Screw L/D Ratio | 22.8 |
| Plasticizing Capacity(g/s) | 200 G/s |
| Product Material | Steel,Aluminium |
|---|---|
| Product | Household Product,Household Appliance,blowing Mould |
| Shaping Mode | Blowing Mould |
| Cavity | Multi Cavity,Single/Multi |
| Packaging Details | Packing in wooden cases |
| Screw Diameter | 56 Mm |
|---|---|
| Shot Volume(theoretical) | 788 Cm³ |
| Shot Weight | 709 G |
| Injection Pressure | 178 MPa |
| Injection Rate | 210 G/s |
| Screw Diameter | 50 Mm |
|---|---|
| Shot Volume(theoretical) | 608 Cm³ |
| Shot Weight | 546 G |
| Injection Pressure | 184 MPa |
| Injection Rate | 160 G/s |
| Screw Diameter | 54 Mm |
|---|---|
| Shot Volume(theoretical) | 720 Cm³ |
| Shot Weight | 650 G |
| Injection Pressure | 190 MPa |
| Injection Rate | 200 G/s |
| Weight (KG) | 6 Kg |
|---|---|
| Applicable Industries | Food & Beverage Factory, Food & Beverage Shops, Other, L |
| Video Outgoing-inspection | Provided |
| Core Components | Motor, Gear, Engine, Gearbox, Screw |
| Ejector Force(kN) | 70 KN |
| Screw Diameter | 54 Mm |
|---|---|
| Shot Volume(theoretical) | 720 Cm³ |
| Shot Weight | 650 G |
| Injection Pressure | 190 MPa |
| Injection Rate | 200 G/s |
| Max. Product Volume | 5 L |
|---|---|
| Dry Cycle | 1000 PC/H |
| Screw Diameter | 65 Mm |
| Screw L/D Ratio | 24 L/D |
| Screw Drive Power | 18.5 KW |
| Max. Product Volume | 5 L |
|---|---|
| Dry Cycle | 1000 PC/H |
| Screw Diameter | 65 Mm |
| Screw L/D Ratio | 24 L/D |
| Screw Drive Power | 18.5 KW |
| Screw Diameter | 45 Mm |
|---|---|
| Shot Volume(theoretical) | 460 Cm³ |
| Shot Weight | 415 G |
| Injection Pressure | 188 MPa |
| Injection Rate | 140 G/s |
