| Suitable Product Volume | 0-5 L |
|---|---|
| Dry Cycle | 1000 Pc/h |
| Screw Diameter | 65 Mm |
| Screw L/D Ratio | 24 |
| Screw Drive Power | 18.5 KW |
| Model NO. | DSB80II |
|---|---|
| Station | One Station Or Two Station |
| Auto-Deflashing | Available |
| Made In | China |
| Material | HDPE,PP,PVC,LDPE |
| Application | Beverage Bottle, Oil Bottle |
|---|---|
| Automatic | Fully Automatic |
| Technical Service | 24 Hours/365 Days Online |
| Controlled By | PLC |
| Moulding Closing And Opening Cylinder | Festo |
| Blow Molding Type | Blow Molding Machine |
|---|---|
| Maximum Application Size | 2L |
| Cooling Water Pressure | 0.5~0.6 MPA |
| Water Consumption | 30 L/Min |
| Mould Lifespan | > 2,000,000 Cycles |
| Screw Diameter (mm) | 75 Mm |
|---|---|
| Automation | Automatic |
| Screw Heating Power(kW) | 7 KW |
| Mold Platen Size(Width)(mm) | 380 Mm |
| Air Pressure(MPa) | 0.6 MPa |
| Application | Bottles, Jars, Jerry Cans, Gallons, Containers |
|---|---|
| Auto-Deflashing | With Auto-Deflashing |
| Mould | One Cavity Or Two Cavity |
| Sutiable | 0~5L Bottle |
| Made In | China |
| Product | Household Appliance,blowing Mould |
|---|---|
| Shaping Mode | Blowing Mould |
| Mould Material | P20,P20/718/738/NAK80/S136/2738/2316 |
| Runner | Hot/cold |
| Cavity | One Or More |
| Application | Bottles, Jars, Jerry Cans, Gallons, Containers |
|---|---|
| Auto-Deflashing | With Auto-Deflashing |
| Mould | One Cavity Or Two Cavity |
| Sutiable | 0~5L Bottle |
| Made In | China |
| Application | Bottles, Jars, Jerry Cans, Gallons, Containers |
|---|---|
| Auto-Deflashing | With Auto-Deflashing |
| Mould | One Cavity Or Two Cavity |
| Sutiable | 0~5L Bottle |
| Made In | China |
| Application | Bottles, Jars, Jerry Cans, Gallons, Containers |
|---|---|
| Auto-Deflashing | With Auto-Deflashing |
| Mould | One Cavity Or Two Cavity |
| Sutiable | 0~5L Bottle |
| Made In | China |
