| Screw Diameter | 50 Mm |
|---|---|
| Shot Volume(theoretical) | 608 Cm³ |
| Shot Weight | 546 G |
| Injection Pressure | 184 MPa |
| Injection Rate | 160 G/s |
| Model NO. | ABLB90 |
|---|---|
| Station | Single Station Or Double Station |
| Oil Pump Motor Power | 5.5kw |
| Head Heating Power | 5.7kw |
| Trademark | DAWSON |
| Max. Product Volume | 5 L |
|---|---|
| Dry Cycle | 1000 PC/H |
| Screw Diameter | 85 Mm |
| Screw L/D Ratio | 24 L/D |
| Screw Drive Power | 18.5 KW |
| Clamping System | Toggle Type Clamping System |
|---|---|
| Mould | One Cavity Or Two Cavity |
| Specification | ABLB90-30L |
| Application | Bottles, Jars, Jerry Cans, Gallons, Containers |
| Die Head | Single Head Or Double Head |
| Mould Material | 45#, 50#, P20, H13, 718, 2738, NAK80, S136, SKD61 Etc |
|---|---|
| Auto-deflashing | Auto-deflashing System Provided |
| Cavity | Multiple Cavities Available |
| Surface Treatment | Polishing |
| Mould Base | HASCO Standard, European Standard, World Standard |
| Max. Product Volume | 120L |
|---|---|
| Dry Cycle | 360 PC/H |
| Screw Diameter | 100 MM |
| Screw L/D Ratio | 28 L/D |
| Screw Drive Power | 55 KW |
| Max. Product Volume | 120L |
|---|---|
| Dry Cycle | 360 PC/H |
| Screw Diameter | 100 MM |
| Screw L/D Ratio | 28 L/D |
| Screw Drive Power | 55 KW |
| Model NO. | ABLB90 |
|---|---|
| Station | Single Station Or Double Station |
| Oil Pump Motor Power | 5.5kw |
| Head Heating Power | 5.7kw |
| Trademark | DAWSON |
| Model NO. | ABLB90 |
|---|---|
| Station | Single Station Or Double Station |
| Oil Pump Motor Power | 5.5kw |
| Head Heating Power | 5.7kw |
| Trademark | DAWSON |
| Model NO. | ABLB90 |
|---|---|
| Station | Single Station Or Double Station |
| Oil Pump Motor Power | 5.5kw |
| Head Heating Power | 5.7kw |
| Trademark | DAWSON |
