| Model NO. | DSB80-30L |
|---|---|
| Station | Single Station Or Double Station |
| Oil Pump Motor Power | 5.5kw |
| Head Heating Power | 5.7kw |
| Trademark | DAWSON |
| Screw | 76 Mm |
|---|---|
| Shot Size | 1766 Cm³ |
| Shot Weight | 1590 G |
| Injection Pressure | 158 Mpa |
| Injection Rate | 398 G/s |
| Screw | 76 Mm |
|---|---|
| Shot Size | 1766 Cm³ |
| Shot Weight | 1590 G |
| Injection Pressure | 158 Mpa |
| Injection Rate | 398 G/s |
| Screw | 76 Mm |
|---|---|
| Shot Size | 1766 Cm³ |
| Shot Weight | 1590 G |
| Injection Pressure | 158 Mpa |
| Injection Rate | 398 G/s |
| Screw | 76 Mm |
|---|---|
| Shot Size | 1766 Cm³ |
| Shot Weight | 1590 G |
| Injection Pressure | 158 Mpa |
| Injection Rate | 398 G/s |
| Max. Product Volume | 300L |
|---|---|
| Dry Cycle | 360 PC/H |
| Screw Diameter | 100 MM |
| Screw L/D Ratio | 28 L/D |
| Screw Drive Power | 55 KW |
| Screw Diameter | 45 Mm |
|---|---|
| Shot Volume(theoretical) | 460 Cm³ |
| Shot Weight | 415 G |
| Injection Pressure | 188 MPa |
| Injection Rate | 140 G/s |
| Screw Diameter | 70mm |
|---|---|
| Product Range | 0~5L |
| Material | HDPE, LDPE, PP |
| Clamping Force | 68KN |
| Template Size | 380*450mm |
| Screw Diameter | 70mm |
|---|---|
| Product Range | 0~5L |
| Material | HDPE, LDPE, PP |
| Clamping Force | 68KN |
| Template Size | 380*450mm |
| Mould Material | 45#, 50#, P20, H13, 718, 2738, NAK80, S136, SKD61 Etc |
|---|---|
| Auto-deflashing | Auto-deflashing System Provided |
| Cavity | Multiple Cavities Available |
| Surface Treatment | Polishing |
| Mould Base | HASCO Standard, European Standard, World Standard |
