| Screw Diameter | 40mm |
|---|---|
| Screw L/D Ratio | 20.5:1 |
| Theoretical Injection Capacity | 238cm³ |
| Injection Pressure | 174Mpa |
| Max. Hydraulic Pressure | 140Kg/cm |
| Application | Bottles, Jars, Jerry Cans, Gallons, Containers |
|---|---|
| Clamping System | Toggle Type Clamping System |
| Extruder Motor | 30kw Siemens Motor |
| Specification | ABLB90-30L |
| Max. Product Volume | 25L |
| Product Material | Steel,Aluminium |
|---|---|
| Product | Household Product,Household Appliance,blowing Mould |
| Shaping Mode | Blowing Mould |
| Cavity | Multi Cavity,Single/Multi |
| Packaging Details | Packing in wooden cases |
| Design Software | AutoCAD |
|---|---|
| Customized | Customized |
| Condition | New |
| Assembling | Neck Part And Bottom Part Removable |
| Cooling System | Separate Cooling System |
| Max. Product Volume | 5 L |
|---|---|
| Screw Diameter | 65 Mm |
| Screw L/D Ratio | 24 L/D |
| Screw Drive Power | 18.5 KW |
| Screw Heating Capacity | 5-6 KW |
| Model NO. | ABLD150 |
|---|---|
| Max. Product Volume | 1000 Liters |
| Mold Platen Size | 1800×1800 |
| Core Components | PLC, Engine, Bearing, Gearbox, Gear |
| Trademark | DAWSON |
| Output (kg/h) | 100 Kg/h |
|---|---|
| Machinery Test Report | Provided |
| Core Components | PLC, Engine, Bearing, Gearbox, Gear |
| Voltage | 440V/415V/380V/220V |
| Water Flow | 100L/Min |
| Design Software | AutoCAD |
|---|---|
| Customized | Customized |
| Condition | New |
| Assembling | Neck Part And Bottom Part Removable |
| Cooling System | Separate Cooling System |
| Design Software | AutoCAD |
|---|---|
| Customized | Customized |
| Condition | New |
| Assembling | Neck Part And Bottom Part Removable |
| Cooling System | Separate Cooling System |
| Design Software | AutoCAD |
|---|---|
| Customized | Customized |
| Condition | New |
| Assembling | Neck Part And Bottom Part Removable |
| Cooling System | Separate Cooling System |
