| Plastic Processed | PP, HDPE, PC, ABS, PVC, PE, ABS/PP, PE/PP, HDPE/PP |
|---|---|
| Air Comsumption(m³/min) | 0.8 M³/min |
| Delivery Time | 60days |
| Production | Hdpe Extrusion Blow Molding Machine |
| Screw Drive Power | 55 Kw |
| Screw | 76 Mm |
|---|---|
| Shot Size | 1766 Cm³ |
| Shot Weight | 1590 G |
| Injection Pressure | 158 Mpa |
| Injection Rate | 398 G/s |
| Screw | 76 Mm |
|---|---|
| Shot Size | 1766 Cm³ |
| Shot Weight | 1590 G |
| Injection Pressure | 158 Mpa |
| Injection Rate | 398 G/s |
| Station | Single Station Or Double Station |
|---|---|
| Max. Product Volume | 5L |
| Auto-Deflashing | With Auto-Deflashing |
| Clamping System | Toggle Type Clamping System |
| Mould | One Cavity Or Two Cavity |
| Station | Single Station Or Double Station |
|---|---|
| Max. Product Volume | 25L |
| Clamping System | Toggle Type Clamping System |
| Summarize | High-Grade Alloy Steel, Center Feeding |
| Extruder Motor | 30kw Siemens Motor |
| Blow Molding Type | Extrusion Blow Molding Machine |
|---|---|
| Maximum Application Size | 20L |
| Cooling Water Pressure | 0.6 MPA |
| Water Consumption | 100 L/Min |
| Mould Lifespan | > 1,000,000 Cycles |
| Max Product Volume | 30 L |
|---|---|
| Dry Cycle | 60 PC/H |
| Screw Diameter | 80 MM |
| Screw L/D Ratio | 24 L/D |
| Screw Drive Power | 30 KW |
| Screw | 76 Mm |
|---|---|
| Shot Size | 1766 Cm³ |
| Shot Weight | 1590 G |
| Injection Pressure | 158 Mpa |
| Injection Rate | 398 G/s |
| Screw | 76 Mm |
|---|---|
| Shot Size | 1766 Cm³ |
| Shot Weight | 1590 G |
| Injection Pressure | 158 Mpa |
| Injection Rate | 398 G/s |
| Screw | 76 Mm |
|---|---|
| Shot Size | 1766 Cm³ |
| Shot Weight | 1590 G |
| Injection Pressure | 158 Mpa |
| Injection Rate | 398 G/s |
